For those who do not know, a psaltery is an instrument that is somewhat a combination of a violin and a harp and is often played in the olden days. Now if one likes to play a string instrument that produces a somewhat unique sound, then he can actually play this instrument. This guide will help him be able to create his own handmade psalteries.
To begin the process, one has to first make sure that he makes the frame. Now do take note that the frame is one of the most important parts of the entire instrument because it is the thing that holds everything. So if one would want to make the frame, he has to first cut out two thin pieces of plywood for the sides and a thick piece for the base.
After acquiring these three pieces, then the next thing to do would be to use some glue to put them together. Now in order to put them together, one would have to make use of some wood glue which can be bought in stores. So after he puts the glue, he just has to wait for the glue to dry then he may proceed.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
After doing this, he must now carve a small hole in the middle and then concentrate on attaching the pins. Now if one is not familiar as to where he should put the pins, he may actually look it up on the internet. Of course in order to make the holes, he has to use a drill that is strong enough to go through the wood.
Now once the pins have been put into place, the next thing to do would be to add the strings. Now the strings can be bought at a music store anywhere in the country. To attach the strings, one must tie the strings to the pins with the help of some pliers.
After doing that, then the last thing that one has to do would be to attach the bridge. Now the bridge is a very important part of the entire psaltery because it is what will make the strings sound really good. It should be located on the pins that are on the bottom of the instrument. Once that is already done, then one now has a psaltery which he can start plucking and strumming away. He may also want to build a bow along with it but that is already a different story.
To begin the process, one has to first make sure that he makes the frame. Now do take note that the frame is one of the most important parts of the entire instrument because it is the thing that holds everything. So if one would want to make the frame, he has to first cut out two thin pieces of plywood for the sides and a thick piece for the base.
After acquiring these three pieces, then the next thing to do would be to use some glue to put them together. Now in order to put them together, one would have to make use of some wood glue which can be bought in stores. So after he puts the glue, he just has to wait for the glue to dry then he may proceed.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
After doing this, he must now carve a small hole in the middle and then concentrate on attaching the pins. Now if one is not familiar as to where he should put the pins, he may actually look it up on the internet. Of course in order to make the holes, he has to use a drill that is strong enough to go through the wood.
Now once the pins have been put into place, the next thing to do would be to add the strings. Now the strings can be bought at a music store anywhere in the country. To attach the strings, one must tie the strings to the pins with the help of some pliers.
After doing that, then the last thing that one has to do would be to attach the bridge. Now the bridge is a very important part of the entire psaltery because it is what will make the strings sound really good. It should be located on the pins that are on the bottom of the instrument. Once that is already done, then one now has a psaltery which he can start plucking and strumming away. He may also want to build a bow along with it but that is already a different story.
About the Author:
You can visit www.davespsaltery.com for more helpful information about Steps To Making Handmade Psalteries.
No comments:
Post a Comment